Bouilleurs de France is a registered trademark and has a patent.
SARL BOUILLEURS de FRANCE au capital de 50 000 € - RCS de Bergerac n° 800 968 190 - APE n° 2521ZZ
Off season: prevent at least 24.00 in advance
Virtual presentation of our
still being éllaboration in our workshops.
Public release exclusively on
June 2, 2013 the show Alernative Nature in
Coming soon on this page
Installation, connection and complete test:
ECO-UPS Bouilleurs de France managing the power supply in case of power failure.
FLAT-TWIN -exchanger Bouilleurs de France (new product).
a storage tank 500 liters.
A view of the C215 once wrapped in the insulation 4 cm thick.
The maintenance is carried out by five small son of ordinary iron, it is a simple solution and, in time, is more reliable than using aluminum tape, a product that always ends off, more so in ambient to elevated temperature.
The insulation used is designed for temperatures up to 400 ° C and is rated M zero. The need for the C150 and C215 area is
1.2 m², 1.5 m² for becoming a C215Max.
Above the flue boiler, after the flue had passed, it is the best location for the temperature sensor. Which measures the temperature of water is placed on the bottom of the flue boiler before the introduction of the insulation, with a collar type "serflex" surrounding the exchanger.
The installation must be in compliance with DTU 24.1
A view of the insert 700 Invicta 14 kW overcome our C215 model delivering 6 kW with a normally high heat before laying its high temperature insulation.
The automatic air vent our schemas are seen in direct connection transplanting purge is the highest point of the boiler, it ensures that no small amount of air will remain trapped inside.
The flue boiler is directly laid on the hearth utilsant a fitting on nozzle 200 femelle/220 female and the junction with the duct is done through a mâle/200 female adapter 220.
You will notice that the two hydraulic connections are made using two high temperature flexible. Besides the fact that this type of arrangement is convenient and allows small imperfections of flue boiler / Copper tube placement, it also allows you to place temperature sensors just the flexible junction / Copper and perform reliable and accurate measures without being distorted by the heat conduction in the steel of the external taps of the flue boiler.
Our small showroom or demo room.
The most important is that stock adapters duct diameter, as it is a bespoke manufacturing involving possible after control about 3 weeks.
Each size has a male connector piece / male for plug connectors and male / female for new start up the pipe, it allows to observe the direction of standardized mounting flues.
At the bottom: our trailer for demonstration at trade shows.
Our electronic control system that manages the flow of water in the circuit according to the temperatures of the flue and the water in the lower part of the boiler.
Left trigger occurs at 130 degrees on the smoke, right is 45 °C on the return water circuit. Both functions must be validated to ensure that the order is given to start the circulator.
An important novelty: The control box can be mounted on a wire and placed away from the boiler in a technical area, only two sensors 800 and 200 °C are fixed installation and are normally invisible.
A close up of the double injection valve with thermal sensor at 100 °C
There is at the bottom of the cold water supply network (left) will be injected (right) in the arrival (input) of the boiler in case of overheating.
At the top, the expelled (right) by the cold water, leaves and goes down the drain (left).
The circuit remains under pressure without there lack of water after the action, even in the absence of you.
This image shows the hydraulic mount installation regardless of aesthetics. You will note that this is the exact replica of what we present on our pages "schemas".
For various tests we installed a water meter to actually measure the flow of water flowing.
The solenoid valve will be mounted for operation in a boiler, in order to prevent the hot water produced by the latter is flowing through the boiler when the fire is extinguished.
Showroom Bouilleurs de France
Since the beginning of this year 2013, we completed a full installation, our workshops, to allow people who visit better able to understand their future installation us.
In addition visitors can see for themselves the result as the C215 in service ensures alone heating the offices of the company, with a power dissipation of 6 kW with radiators made of cast aluminum, equivalent to 70 m².
As already in the past, the heat source is a closed fireplace Invicta 700 14 kW announcing a 71% yield, with flue gas temperatures recorded from 130 to 300 ° C in normal use.
This unit has a cost more affordable, has a rugged construction, 100% cast iron, and corresponds to a type of equipment prevalent in France. We remind that Invicta is a French brand.
The purpose of this demonstration is multiple:
-a) Provide three heating zones, Showroom + office + residential, all representing more than 250 m².
-b) Having a local presentation available and enjoyable for our visitors.
-c) View real hydraulic assembly of our schemes.
-d) Power constantly testing on new products, make temperature readings, etc..
We deliberately sacrificed the aesthetic side of the installation as you could do at home, the goal is to see everything, to show all of a complete installation.
visits to the website :
Save on your energy bills !!
On may 21, 2013
Monday to Friday
9:00 to 12:00
14:00 to 18:00
Thank you for
Bouilleurs de France
it is the intelligent heating, which quickly pays for itself !
Heating most economical and ecological to warm you thanks to the smoke of your fireplace or your stove.
An innovative way to produce hot water, a perfect blend between wood burning and solar.
Our product does not cause any additional consumption of wood, it uses waste heat from the smoke stack.
Technical information, a quote, estimates, contact us by phone at
05 53 57 01 47
or by mail to
To ensure your comfort of navigation no advertising will be published on our site.